Home > News

Advantages Of Aluminum Alloy Wheels

Jan. 03, 2020

Today, Flow Forming Wheels Supplier simply summarized the advantages of aluminum alloy wheels for your reference.

The first is fuel efficiency. On average, each aluminum alloy wheel is 2kg lighter than a steel wheel of the same size. The car can save 8kg by modifying 4 wheels. And according to related experiments, it is pointed out that for every 1 kg of weight reduction of the five-seater car, about 20L of gasoline can be saved in one year. Although the aluminum alloy wheels are more expensive than the ordinary steel wheels, the fuel cost saved when the car reaches 20,000 km is enough to offset the cost.

The second is to increase the life of the engine. According to the curve of engine load and power, when the load increases to a certain degree, the power will decrease. If the wheel load is increased by 1 unit, the engine will be more difficult, and the engine load will be reduced, which will naturally decrease. Failures and extended life.

The third point is that the heat dissipation is better. The thermal conductivity of aluminum alloy is three times that of steel. The heat dissipation effect is relatively good. When driving at high speed for long distances, the tires can be kept at an appropriate temperature, so that the brake drums and tires can delay aging, increase life and reduce the chance of flat tires.

The fourth is that the roundness is relatively good. The precision of the aluminum alloy wheels is as high as 0.05mm, and the running balance is good, which is helpful to eliminate the phenomenon of overlength of the body and steering wheel shake.

Fifth, it is sturdy and durable. The strength index of impact resistance and tensile strength of Aluminum Alloy Wheels is higher than that of steel wheels. Therefore, aluminum alloys have also been used in the defense industry and aviation industry.

Aluminum Alloy Wheels

Aluminum Alloy Wheels

The sixth point is aesthetics. Steel wheels are monotonous and lack of change due to production constraints. Aluminum alloy wheels have various appearance designs, which enhances the value and aesthetics of automobiles.

Then with more and more friends who like car modification, more people start to try to modify their beloved cars by themselves, and the initial modification will almost always focus on the wheel modification and appearance painting, all major modification shops will see With this in mind, a big fuss is made, bad businesses use fake wheels to deceive consumers, so car fans must also learn how to identify the authenticity of the wheels.

Don't think that the difference between real and fake wheels is not big. The wheel can be said to be one of the most important safety parts when modifying a car. It not only bears the pressure of the quality of the car and the load, but also the car's turning and road surface during driving. Irregular forces caused by dynamic loads from different directions, such as bumps and bumps, and imitation wheels are not reliable in the manufacturing process at first, and their strength is far from sufficient. This poses a huge hidden danger to driving safety.

The method of identifying authenticity is actually very simple. The first is to look at the workmanship. Generally, the workmanship of high-counterfeit wheel hubs is very rough, because the mold accuracy of counterfeit wheel hubs is not high. The original wheels are painted with the same color on the inside and outside, and the fake high-imitation wheels have a huge color difference between the inside and the outside due to the cost problem. Therefore, it is easy to distinguish the original and fake wheels from the appearance and workmanship. There is also the price, anyway, car modification is cheap but not good, be careful about the pie in the sky.

The above are the advantages of aluminum alloy wheels introduced by ODM Flow Forming Wheels Manufacturer and how to identify genuine and fake wheels.

Zhenjiang YuJiu Intelligent Equipment

Copyright © Zhenjiang YuJiu Intelligent Equipment All Rights Reserved

Contact Us
  • E-mail: jack@safewheels.cn
  • Tel: +86 15262913899
  • Tel: +86 511 8317 3198
  • Add.: Zhenjiang Factory:No.19 Wu Feng Shan Road, Dagang New District, Jiangsu, Zhenjiang City, China
  • Add.: Siyang Factory:No.219 East Zhong Xing Road, Siyang Economic Development Zone, Suqian City, China
Follow Us

Sitemap | Powered by