When the car tire is full of gas, the outer edge of the tire will fit snugly against the Flow Formed Aluminum Alloy Wheels flange to prevent gas leakage inside the tire. If the hub flange is impact-deformed, it will affect its tightness with the outer edge of the tire, causing the tire to leak. Therefore, in the daily use of the car, care should be taken to avoid collision with the hub to prevent deformation of the hub. The wheel flange of the car is severely deformed and can be found with the naked eye. If you can't see it, it means that the deformation is not obvious. You need to remove the wheel first, and sprinkle water on the joint between the tire and the hub. If the bubble is generated, it means that the part is the place where the tire leaks. If the deformation of the automobile hub is not repaired in time, it will cause more serious damage - the hub is broken. The rupture of the Casting Flow Formed Aluminum Alloy Wheels will cause the gas inside the tire to leak from the crack, which becomes a hidden danger of tire rupture. When this happens, be sure to replace the new tires in time, because the risk of tire rupture is very high, threatening the driver's personal safety, so be sure not to care.